Panasonic KX-TCD950E-B Operating Instructions Manual page 49

4
Press the desired base unit number using
buttons 1 to
" " flashes.
While the handset is searching for the base
unit, "–" flashes across the display.
The number is assigned as the base unit
number for the handset.
5
Enter the base unit password using a 4 digit
number.
The factory preset of the base unit password
is 0000. If you have changed the base unit
password (p. 35), enter the new password.
6
When finished, press
A confirmation tone sounds.
" " stops flashing.
" " goes out and the handset is registered
in the base unit.
The base unit number is displayed.
The in use indicator (
goes out.
4 .
(Program).
) on the base unit
Ex. Base unit 1 is
assigned.
-
7 i -
7 i - - - -
-
Ex. The handset is
registered in base
unit 1 .
- i -
49