Table of Contents
Advertisement
Problem
I cannot make local calls
with the handset using a
mobile line.
I cannot make or answer
mobile calls with the
handset.
or
I cannot answer mobile
calls with the base unit.
I can make and answer
mobile calls but cannot
hear a sound.
I cannot switch mobile
calls from the unit to the
mobile phone.
I cannot make a call.
I pressed MZN on the base
unit but the desired mobile
call was not transferred to
the base unit.
The mobile line is not
disconnected even though
I ended the call on the
handset (or the base unit).
Caller ID
Problem
Caller information is not
displayed.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
PRL250EX1(en)1006_ver011.pdf
Cause/solution
R You need to add your area code when making mobile calls.
Store your area code in order to automatically add it to the
beginning of the phone number when making mobile calls
(page 23).
R Depending on the mobile phone's compatibility, you may not
be able to make or answer mobile calls even if the mobile
phone is connected to the base unit.
R Make sure that the indicator (
phone is connected to the base unit (page 22).
R If someone is talking on a mobile call, you cannot use the
mobile feature. There can be only one active Bluetooth
connection at a time.
R The mobile phone is being used separately from your system.
R The Bluetooth technology on your mobile phone may not be
functioning normally. Turn off and on your mobile phone.
R Disconnect and reconnect the base unit AC adaptor and try
again.
R Your mobile phone may not support this feature. Refer to the
operating instructions of your mobile phone.
R The dialling mode may be set incorrectly. Change the setting
(page 19).
R You dialled a call restricted number (page 46).
R The key lock feature is turned on. Turn it off (page 29).
R If the landline is in use when MZN is pressed on the base unit,
the base unit picks up the landline.
R If 2 mobile phones are in use when MZN is pressed on the
base unit, the base unit picks up the mobile 1 line.
R This may occur depending on the phone app. Use the mobile
phone to disconnect the call.
Cause/solution
R You must subscribe to a Caller ID service. Contact your
service provider/telephone company for details.
R If your unit is connected to any additional telephone
equipment, remove and plug the unit directly into the wall jack.
R If you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
R Other telephone equipment may be interfering with this unit.
Disconnect the other equipment and try again.
61
Useful Information
/
) lights up and the mobile
2014/10/06
15:04:37
61
Advertisement
Table of Contents
