Table of Contents
Advertisement
To use this feature, set the date and time first (page 17).
*3
When the mobile line only mode is turned on, these menus are not displayed (page 22).
*4
The preset melodies in this product ("Ringtone 3" - "Ringtone 40") are used with
permission of © 2012 Copyrights Vision Inc.
*5
This tone lets you know when you receive an outside call while you are on another line or an
intercom call. If you select "On", the tone sounds 2 times.
*6
If you do not want the unit to ring before the caller information is received, set to "Off".
(Caller ID subscribers only)
You can only remove the first ring if the unit rings 2 times or more by default, which depends
on your service provider/telephone company.
*7
This setting is available when you have the key finder (KX-TGA20EX). Read the installation
manual for more information on the key finder.
*8
This menu icon is displayed when the key finder is not registered.
*9
After the Bluetooth device is paired, the device name is displayed.
*10 For mobile 1
*11 For mobile 2
*12 The preset melodies in this product ("Ringtone 1" and "Ringtone 2") are used with
permission of © 2013 Copyrights Vision Inc.
*13 For models with supplied key finders, the display shows "1:Finder1".
*14 If you register 2 or more key finders.
*15 This menu is not displayed when repeater mode is set to "On".
*16 You can select to display either a single item or multiple items on one screen at a time for
the handset menu list, phonebook list, caller list, and redial list. When in multiple items
display mode, you can switch the screen to confirm the detailed information by:
– pressing M
N, or
– pressing M
N a MbN: "Detail" a MOKN
*17 You can set the handset display backlight while on charge.
– "On": Backlight is on (dimmed).
– "Off": Backlight turns off after 10 seconds of charging.
*18 If you subscribe to a Caller ID service and want to view the caller's information after lifting up
the handset to answer a call, turn off this feature.
*19 If you select "United Kingdom" or "Deutschland" as the unit's region setting
(page 47), the dialling mode setting is not shown on the display because it is not required
for these countries.
*20 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*21 The default setting will be as follows if you select the following regional codes when
changing the unit's region setting (page 47):
"Deutschland" = "200 msec."
"España" = "100 msec."
"Italia" = "100 msec."
*22 To prevent other users from joining your conversations with outside callers, turn this feature
on.
*23 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
PRL250EX1(en)1006_ver011.pdf
41
Programming
2014/10/06
15:04:35
41
Advertisement
Table of Contents
