Panasonic KX-PRD250EX1 Operating Instructions Manual page 59

Link-to-mobile docking station for smartphone
Hide thumbs Also See for KX-PRD250EX1:
Table of Contents

Advertisement

Problem
I cannot connect a mobile
phone to the base unit.
I cannot hear a dial tone.
I cannot use the Smart
Function Key even if the
indicator is flashing
slowly.
Menu list
Problem
The display is in a
language I cannot read.
I cannot activate the eco
mode.
I cannot register a handset
to a base unit.
I cannot remember the
PIN.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
PRL250EX1(en)1006_ver011.pdf
Cause/solution
R Confirm that your mobile phone is turned on.
R Confirm that your mobile phone is within base unit range
(page 16).
R Your mobile phone's Bluetooth feature is turned off. Turn it on.
R Depending on the state of the wireless environment, such as
the presence of any electrical interference, there may be a
delay even if the auto connection feature is turned on. You can
connect to the base unit manually (page 22).
R The mobile phone has not been paired to the base unit. Pair
the mobile phone (page 20).
R The base unit's AC adaptor or telephone line cord is not
connected. Check the connections.
R Disconnect the base unit from the telephone line and connect
the line to a known working telephone. If the working
telephone operates properly, contact our service personnel to
have the unit repaired. If the working telephone does not
operate properly, contact your service provider/telephone
company.
R Another unit is in use. Wait and try again later.
R The key lock feature is turned on. Turn it off (page 29).
Cause/solution
R Change the display language (page 17).
R You cannot set eco mode when you set the repeater mode
"On". If required, set the repeater mode to "Off" (page 48).
R The maximum number of handsets (6) is already registered to
the base unit. Cancel unused handset registrations from the
base unit (page 48).
R You entered the wrong PIN. If you forget your PIN, see "I
cannot remember the PIN." (page 59).
R Change the PIN using the following method.
1
M
N (right soft key) #132
2
*7000
3
Enter the new 4-digit base unit PIN. a MOKN
4
MbN: "Yes" a MOKN a M
59
Useful Information
N
2014/10/06
15:04:36
59

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-prl250ex1

Table of Contents