SMC Networks SMCD3GNV3 User Manual page 151

錯誤 錯誤! 使用 錯誤 錯誤
Option
User Defined Service
Protocol
Start Port
End Port
Always Block?
Start from
End on
Set Blocked Days
SAVE button
CANCEL button
Defining Trusted Computers
Trusted computers let you exempt connected computers from the blocked services rules you
defined in the previous section. To build a list of trusted computers, perform the following
procedure from the Managed Sites menu.
<<need to verify??>>
使用 使用 [常用 使用 常用] 索引標籤將 常用 常用 索引標籤將 索引標籤將 索引標籤將 Heading 1 套用到您想要在此處顯示的文字
Table 43. Add Blocked Service Menu
Enter the service you want blocked.
The type of protocol associated with the service to be blocked. Choices are:
•
TCP
•
UDP
•
TCP/UDP ( default )
Starting port number on which the block will be applied. If necessary, contact the application
vendor for this information.
Ending port number on which the block will be applied. If necessary, contact the application
vendor for this information.
Select whether you want the Gateway to always block this service. Choices are
•
No = the Gateway does not always block this service. Use the Set Block Time and Set
Blocked Days to instruct the Gateway when to block this service.
•
Yes = the Gateway always blocks this service until you remove the block. ( default )
If you selected No for Always Block?, select the time when the Gateway is to start blocking
this service.
If you selected No for Always Block?, select the time when the Gateway is to stop blocking
this service.
Set Blocked Days
If you selected No for Always Block?, use one of the following methods to specify when the
Gateway is to block this service:
•
Select All = blocks the service for seven days.
•
Select None = deselect blocking of the service for seven days.
•
Monday – Sunday = check the check boxes that correspond to the days when you want the
Gateway to block this service.
Click this button to save your settings.
Click this button to discard your settings on the Add Blocked Domain menu.
SMCD3GNV Wireless Cable Modem Gateway User Manual
套用到您想要在此處顯示的文字。 。 。 。 套用到您想要在此處顯示的文字 套用到您想要在此處顯示的文字
Description
Set Block Time
151