Supermicro SBA-7121M-T1 Setup Procedure
Blade module
raid setup procedure
Hide thumbs
Also See for SBA-7121M-T1:
- Bios setup manual (17 pages) ,
- User manual (66 pages) ,
- Bios setup manual (17 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Supermicro SBA-7121M-T1
Summary of Contents for Supermicro SBA-7121M-T1
- Page 1 SBA-7121M-T1 Blade Module RAID Setup Procedure Revison 1.0...
- Page 2 Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com. Super Micro Computer, Inc. (“Supermicro”) reserves the right to make changes to the product described in this manual at any time and without notice. This product, including software, if any, and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any medium or machine without prior written consent.
-
Page 3: Installing The Operating System
An operating system (OS) must be installed on each blade module. Unlike most blade systems, blades with Microsoft Windows OS and blades with Linux OS can both occupy and operate within the same blade enclosure. Refer to the Supermicro web site for a complete list of supported operating systems. -
Page 4: Management Software
Installing the Operating System with RAID Any blade module that supports two or more hard drives may be used to create a RAID RAID array. For AMD processor SuperBlade modules, only the SBA-7121M-T1 blade module with two hard drives installed works for this purpose. - Page 5 SBA-7121M-T1 RAID Setup Procedure 3. From the SATA Configuration menu screen select the NV RAID F IDIA UNCTION setting, hit <E > to open its options and select E NTER NABLE 4. Go to the E Menu, highlight S and hit <E >.
- Page 6 SBA-7121M-T1 RAID Setup Procedure Notes...