Table of Contents
Advertisement
4
i
NOTE
This device may be
used
with
all
de-
vices certified with
the Z-Wave Plus cer-
tificate and should be
compatible with such
devices produced by
other manufacturers.
i
NOTE
FIBARO Switch 2 is
a Security Enabled
Z-Wave Plus product
and a Security Ena-
bled Z-Wave Control-
ler must be used in or-
der to fully utilize the
product.
DESCRIPTIOn AnD FEATuRES
#1: Description and features
FIBARO Switch 2 is designed to be installed in standard wall switch
boxes or anywhere else where it is necessary to control electric
devices. FIBARO Switch 2 allows to control connected devices either
via the Z-Wave+ network or via a switch connected directly to it and
is equipped with active power and energy consumption metering
functionality.
Main features of FIBARO Switch 2:
•
Compatible with any Z-Wave or Z-Wave+ Controller,
•
Supports protected mode (Z-Wave network security mode) with
AES-128 encryption,
•
Advanced microprocessor control,
•
Active power and energy metering functionality,
•
Works with various types of switches – momentary, toggle,
three-way, etc,
•
To be installed in wall switch boxes of dimensions allowing for
installation, conforming to provisions of applicable regulations,
•
FIBARO Switch 2 is an extension unit.
FIBARO Switch 2 is a fully
compatible Z-Wave PLUS device.
Advertisement
Table of Contents
