HYOSUNG GT 650 Service Manual page 32

◉ FRONT AND REAR BRAKE FLUID REPLACE-
MENT
● Place the motorcycle on a level surface and keep the
handlebars straight.
● Remove the master cylinder reservoir cap and diaphragm.
● Suck up the old brake fluid as much as possible.
● Fill the reservoir with new brake fluid.
Specification and Classification
(Front brake) : DOT 4
(Rear brake) : DOT 4
● Connect a clear hose ① to the air bleeder valve and
insert the other end of the hose into a receptacle.
● Loosen the air bleeder valve and pump the brake
lever until the old brake fluid is completely out of the
brake system.
● Close the air bleeder valve and disconnect the clear
hose. Fill the reservoir with new brake fluid to the
upper line.
● Replace the rear brake
ner of the front brake.
Front brake caliper air bleeder valve
Rear brake caliper air bleeder valve
' s fluid with the same man-
: 6~8 N∙m (0.6~0.8 kg∙m)
: 6~8 N∙m (0.6~0.8 kg∙m)
PERIODIC MAINTENANCE 2-16
[ Rear Brake ]
①