HYOSUNG GT 650 Service Manual page 147

� WHEEL BEARING
Inspect the play of the wheel bearings by fin g e r
while they are in the wheel. Rotate the inner race by
finger to inspect for abnormal noise and smooth rota-
tion.
Replace the bearing in the following procedure if there
is anything unusual.
� WHEEL BEARING REMOVAL
● Remove the wheel bearing by using the special tool.
Wheel bearing remover : 09941 - 50111
CAUTION
The removed bearing should be replaced with
new ones.
◉ REASSEMBLY
Reassemble the front wheel in the reverse order
of removal and disassembly.
Pay attention to the following points :
� WHEEL BEARING
● Apply SUPER GREASE "A"to the wheel bearings.
SUPER GREASE " A "
● Install the wheel bearings as follows by using
the special tools.
Steering race installer : 09941 - 34513
CAUTION
First install the right wheel bearing, then install
the left wheel bearing.
CHASSIS 7-4