HYOSUNG GT 650 Service Manual page 31

2-15 PERIODIC MAINTENANCE
WARNING
The brake system of this motorcycle is filled with
a glycol-based brake fluid. Do not use or mix dif-
ferent types of fluid such as silicone-based or
petroleum-based. Do not use any brake fluid
taken from old, used or unsealed containers.
Never re-use brake fluid left over from the last
servicing or stored for a long period.
WARNING
Brake fluid, if it leaks, will interfere with safe run-
ning and immediately discolor painted surfaces.
Check the brake hoses and hose joints for cracks
and oil leakage before riding.
◉ BRAKE PAD WEAR
The extend of brake pad wear can be checked
by observing the grooved limit � on the pad. When
the wear exceeds the grooved limit, replace the pads
with new ones.
CAUTION
Replace the brake pad as a set, otherwise braking
performance will be adversely affected.
◉ FRONT AND REAR BRAKE PAD REPLACE-
MENT
● Remove the brake caliper.
● Remove the brake pads.
● To reassemble, reverse the above sequence.
Front brake caliper mounting bolt
: 18~28 N∙m (1.8~2.8 kg∙m)
Rear brake caliper mounting bolt
: 18~28 N∙m (1.8~2.8 kg∙m)
[ Rear Brake ]
�
[ Left side of Front Brake ]
[ Right side of Front Brake ]