HYOSUNG GT 650 Service Manual page 164

7-21 CHASSIS
■ FRONT FORK INNER ROD LOCK NUT
● Adjust the height � of the inner rod threads by turn-
ing the lock nut ① at 11mm(0.43 in) as shown in
illustration.
■ FORK SPRING
● Install the fork spring as shown in the illustration.
● Install the spring retainer and the spacer.
■ FRONT FORK CAP BOLT
● Hold the cap bolt ② and tighten the lock nut ③ to the
specified torque.
Inner rod lock nut
: 17.5~22.5N∙ ∙ m (1.75~2.25 kg∙ ∙ m)
● Install the front fork cap bolt to the outer tube tem-
porarily.
● Set the front fork to the lower bracket temporarily,
tighten the front fork cap bolt ④ to the specified
torque.
Front fork cap bolt
● With the front fork upper face contacted with the han-
dlebar holder, tighten the front fork upper and lower
clamp bolts to the specified torque.
Front fork upper clamp bolt
Front fork lower clamp bolt
: 30~40N∙ ∙ m (3.0~4.0 kg∙ ∙ m)
: 22~35N∙ ∙ m (2.2~3.5 kg∙ ∙ m)
: 22~35N∙ ∙ m (2.2~3.5 kg∙ ∙ m)
↓
↑
↓
↑
③
④
Upper side
②