7-19 CHASSIS
■ INNER ROD/DAMPER ROD
Move the inner rod by hand to examine it for smooth-
ness.
If any abnormal points are found, replace inner
rod/damper rod with a new one.
◉ REASSEMBLY AND REMOUNTING
Reassemble and remount the front fork in the reverse
order of removal and disassembly. Pay attention to the
following points :
■ DAMPER ROD BOLT
● Insert the inner rod/damper rod into the inner tube.
● Install the gasket � to the damper rod bolt �, and
apply THREAD LOCK "1324" to the damper rod bolt
� and tighten it to the specified torque.
THREAD LOCK "1324"
Damper rod bolt
: 30~40 N∙ ∙ m (3.0~4.0 kg∙ ∙ m)
CAUTION
Use a new gasket to prevent oil leakage.
■ OIL SEAL AND DUST SEAL
● Apply SUPER GREASE "A"to the new oil seal and
dust seal lips lightly before installing it.
SUPER GREASE "A"
● Install the oil seal retainer ①, oil seal ②, oil seal
stopper ring ③ and dust seal ④ to the outer tube.
CAUTION
● ● When installing the oil seal to outer tube, be
careful not to damage the oil seal lip.
● ● Do not use solvents for washing to prevent oil
seal damage.
● ● Apply fork oil to the Anti-friction meatal � � . .
● ● Make sure that the oil seal stopper ring ③ ③ has
been fitted securely.
■ OUTER TUBE
● Install the outer tube to the inner tube.
CAUTION
Be careful not to damage the dust seal lip and the
oil seal lip, when installing the outer tube.
�
�
�
①
②
③
④