Sony DCR-PC100 Service Manual page 60

2-10.CONTROL SWITCH BLOCK (FK-4950)
6 Remove an end of
the grip belt from
the bracket cap.
5 Slide the cabinet (G) assembly in
the direction of the arrow B and
release the three claws.
Be careful not to damage the control
switch block's (FK-4950) flexible.
qa V/L rechargeable
battery
q; Remove the
two solderings
3 FK flexible clamp
1 Remove the
two claws
1 Screw (M1.7 × 2.5),
lock ace, p2
A
3 Screw
(M1.7 × 2.5),
lock ace, p2
8 Two tapping screws
(M1.7 × 4)
qs Control switch block
(FK-4950)
2-9
5 Screw
(M1.7 × 2.5),
lock ace, p2
4 Six screws
(M1.7 × 2.5),
lock ace, p2
2 FP-128
flexible board (30P)
9 Cabinet (G) assembly
B
2 Three screws
(M1.7 × 2.5),
lock ace, p2
7 Cabinet (L) assembly
4 Two screws
(M1.7 × 2.5),
A
lock ace, p2
6 Remove the control switch
block that is attached to the
cabinet (L) assembly, from
the cabinet (L) assembly.
Be careful that the flexible
must not be caught.