Sony DCR-PC100 Service Manual page 52

The following flow chart shows the disassembly procedure.
2-1. LCD unit, PD-125 board
2-2. MD block-1
2-3. MR-44 board, MD block-2
2-4. Lens assembly, EVF block assembly,
2-5. VC-227 (VC-227P) board, Speaker,
SECTION 2
DISASSEMBLY
Control switch block (ME-4950)
Memory stick connector,
Microphone unit, MA-367 board
2-6. Hinge assembly
(Perform the disassembling after steps 1 - 6 of 2-1 is complete. )
2-7. DC-IN connector, Battery terminal board, FJ-25 board
LCD service position
MD block service position-1
Note : Use the parts only which can be
removed easily from outside of
the MD block.
2-10. Control switch block (FK-4950)
MR-44 board,
MD block service position-2
2-8. CCD/CD block assembly,
MF ring block assembly
2-9. VF-138 board, VF holder assembly,
Eye cup assembly
Service position
(Mainly for voltage measurement and check)
2-1
DCR-PC100/PC100E