Camera System Adjustments; Mhz/66Mhz Origin Oscillation Adjustment; (Cd-234 Board); Zoom Key Center Adjustment - Sony DCR-PC100 Service Manual
Hide thumbs
Also See for DCR-PC100:
- Service manual (215 pages) ,
- Operating instructions manual (140 pages) ,
- User manual (11 pages)
Table of Contents
Advertisement
1-3.
CAMERA SYSTEM ADJUSTMENTS
Before perform the camera system adjustments, check that the
specified values of “VIDEO SYSTEM ADJUSTMENT” are
satisfied.
1. 54MHz/66MHz Origin Oscillation Adjustment
(CD-234 board)
Set the frequency of the clock for synchronization.
If deviated, the synchronization will be disrupted and the color will
become inconsistent.
Subject
Not required
Measurement Point
Pin qh of IC201 of VC-227 board or
pin wd of IC404 of VC-227 board
Measuring Instrument
Frequency counter
Adjustment Page
F
Adjustment Address
12
Specified Value
Pin qh of IC201 of VC-227 board :
f=33000000 ± 165Hz (NTSC)
f=27000000 ± 134Hz (PAL)
Pin wd of IC404 of VC-227 board:
f=13500000 ± 68Hz
Adjusting method:
1)
Select page: 0, address: 01, and set data: 01.
2)
Select page: F, address: 12, change the data and set the clock
frequency (f) to the specified value.
3)
Press the PAUSE button of the adjustment remote commander.
4)
Select page: 0, address: 01, and set data: 00.
48
37
1
36
IC201
48 37
25
12
1
36
13
24
IC404
25
12
24
13
VC-227 board
Fig. 5-1-6
2. Zoom Key Center Adjustment
Set the A/D value center of the microprocessor to the center voltage
of the zoom key.
If deviated, the zoom lens operates of itself, even if the zoom key is
the center position.
Subject
Not required
Measurement Point
Display data of page: 6, address: 50
Measuring Instrument
Adjustment remote commander
Adjustment Page
F
Adjustment Address
13
Note: Don’t touch the zoom lever during adjustment.
Adjusting method:
1)
Select page: 0, address: 01, and set data: 01.
2)
Select page: 6, address: 50, read the data, and this data is named
D
.
50
3)
Select page: F, address: 13, set data: D
.
50
4)
Press the PAUSE button of the adjustment remote commander.
5)
Select page: 0, address: 01, and set data: 00.
5-21
Advertisement
Table of Contents
