Data Logger; Breaker Maintenance - GE F35 Instruction Manual

CHAPTER 6: ACTUAL VALUES
This menu allows the user to view the number of triggers involved and number of oscillography traces available. The cycles
per record value is calculated to account for the fixed amount of data storage for oscillography. See the Oscillography
section of chapter 5 for details.
A trigger can be forced here at any time by setting "Yes" to the FORCE TRIGGER? command. See the
menu for information on clearing the oscillography records.
RECORDS

6.3.4 Data logger

ACTUAL VALUES  RECORDS  DATA LOGGER
 DATA LOGGER

The represents the time at which the oldest available samples were taken. It is static until the log gets
OLDEST SAMPLE TIME
full, at which time it starts counting at the defined sampling rate.
The represents the time the most recent samples were taken. It counts up at the defined sampling
NEWEST SAMPLE TIME
rate. If the data logger channels are defined, then both values are static.
See the
COMMANDS  CLEAR RECORDS

6.3.5 Breaker maintenance

ACTUAL VALUES  RECORDS  MAINTENANCE  BREAKER 1(6)
 BREAKER 1

There is an identical menu for each of the breakers.
The values are in units of kA
BKR 1 ARCING AMP
arcing current records.
F35 MULTIPLE FEEDER PROTECTION SYSTEM – INSTRUCTION MANUAL
NUMBER OF TRIGGERS:

0
AVAILABLE RECORDS:

0
CYCLES PER RECORD:

0.0
LAST CLEARED DATE:

2000/07/14 15:40:16
OLDEST SAMPLE TIME:

2000/01/14 13:45:51
NEWEST SAMPLE TIME:

2000/01/14 15:21:19
menu for clearing data logger records.
BKR 1 ARCING AMP A:

0.00 kA2-cyc
BKR 1 ARCING AMP B:

0.00 kA2-cyc
BKR 1 ARCING AMP C:

0.00 kA2-cyc
BKR 1 OPERATING TIME

A:
0 ms
BKR 1 OPERATING TIME

B:
0 ms
BKR 1 OPERATING TIME

C:
0 ms
BKR 1 OPERATING

TIME: 0 ms
2
-cycles. See the
COMMANDS  CLEAR RECORDS
RECORDS
COMMANDS  CLEAR
menu for clearing breaker
6-23
6