Scanner Motor Operation - Toshiba e-STUDIO 160 Service Manual

7.3 Scanner Motor Operation

Carriage 1
Timing belt 142
Carriage 2 roller
Timing belt 157
Carriage 2
Wire
Wire roller
Wire roller
Scanner drive shaft
Scanner motor
Scanner drive gear
Scanner motor pulley
08-03-01
Rotation of the scanner motor is transmitted to carriages 1 and 2 via the timing belt and carriage drive
wire. First of all, carriages 1 and 2 moves to the home position. Home position is detected by carriage 1
passing the home position sensor. Carriages 1 and 2 then scan the original when the [START] key on the
control panel is depressed.
December 2002 TOSHIBA TEC 7 - 5 e-STUDIO160/200/250 SCANNER