Configuration - Toshiba e-STUDIO 160 Service Manual

7.2 Configuration

The following describes the configuration of the optical system and the purpose of its components.
(1) Original glass
The original glass is for placing the original. The original is illuminated by light from the exposure lamp
passing through the original glass.
(2) Carriage 1
Carriage 1 is driven by the scanning motor to scan the original, and is made up of the following parts:
a. Exposure lamp
The exposure lamp emits the light for illuminating the original. (Xenon lamp)
b. Reflector
The reflector is for efficiently directing light from the exposure lamp onto the surface of the original.
c. Mirror 1
Mirror 1 is for guiding light reflected from the original to mirror 2. Mirror 2 is described later on.
e-STUDIO160/200/250 SCANNER
Exposure lamp
Mirror 1
Reflector
Carriage 1
Original
Exposure lamp
Mirror 1
7 - 2
Reflector
Original glass
08-02-02
December 2002 TOSHIBA TEC
08-02-01