Toshiba e-STUDIO 160 Service Manual page 58

3.4 Disassembly and Replacement
When disassembling the process unit, pay special attention not to damage the drum and magnetic roller.
Also, be careful not to be injured by the edges of the parts.
[A] Separation claw
1. Remove the toner cartridge and the process
unit.
2. Detach the separation claw.
Note: Be careful not to be injured by the edges of
the separation claw and star wheel.
[B] Main charger wire/ Main charger grid
1. Remove the toner cartridge and the process
unit.
2. Remove 4 screws and detach the drum assem-
bly.
3. Remove 2 screws and detach the DLE PWA
assembly.
e-STUDIO160/200/250 COPYING PROCESS
Screw
3 - 10
Spring
Separation claw
Fig. 3-4-1
Drum assembly
Screw
Fig. 3-4-2
Screw
DLE PWA assembly
Screw
Fig. 3-4-3
December 2002 TOSHIBA TEC
3-4-33
3-4-34
3-4-03