Parts Supplied; Cavity Preparation - Fisher & Paykel DD60D Series Installation Instructions Manual

PARTS SUPPLIED

4
Drain hose Drain hose Wire clip (2)
support (1) joiner (1)
If the Drain hoses supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hoses by 3.6 m. The kit is available from the nearest
Fisher & Paykel Authorised Service Centre or our local website listed at the end of this document.

CAVITY PREPARATION

5
Side mounting
Clamp (1) Top
bracket kit
mounting
(A and B) (2)
brackets (2)
OPTIONAL
OPTIONAL
10 mm
Moisture
protection
tape must
be applied.
min. ø
*
220-240 VAC min. 9.5 A
Phillips Rubber Moisture protection
16 mm washer for tape (1)
screws (9) inlet hose (1) (to prevent moisture
damage)
Waste disposal
(optional)
60 mm
*
Hexagonal Prefinished toekick (1)
socket (2)
white or black
(long & short)
min.
200 mm