Fisher & Paykel DD60D Series Installation Instructions Manual page 4

These marks indicate mounting bracket screw locations, if securing by drawer removal.
*
Preferred position. If adequate clearance, services hole can be higher to clear toekick space.
If hole is higher, ensure drain hoses are routed straight into the waste connection.
Water Connection
Recommended COLD (Maximum 60°C).
¾ " BSP (GB20) to suit flat washer.
Water Pressure
Water softener models 1 MPa (145 psi)
Other models 1 MPa (145 psi)
Important!
The power outlet must be located in a cabinet adjacent to the DishDrawer cavity.
Drains will need to be separated to satisfy kosher requirements. We suggest you confirm acceptability with your local rabbi in respect to kosher installations.
Max. distance of
hoses and cord from
chassis edge
Drain hose
Inlet hose
Power cord
Max Min
0.1 MPa (14.5 psi)
0.03 MPa (4.3 psi)
Left hand Right hand
side side
2000 mm 1800 mm
1650 mm 1250 mm
(excl. plug)
1650 mm 1650 mm
Left hand Right hand
side side