Fisher & Paykel DD60D Series Installation Instructions Manual page 5

ROUTE THE HOSES
6
SECURE BY DRAWER REMOVAL
7
MOVE INTO THE CAVITY
If top mounting brackets are being
2
used, ensure they're securely fitted
before sliding product into cavity.
optional (x2)
optional
Loosen feet only and take
care when pushing the
product into the cavity that
you do not bend the feet.
8
REMOVE THE LOWER DRAWER
1
Tie together to
avoid kinking.
Ensure hoses and
cord are not kinked
or twisted.
3
3
1
1
4
Ensure the drawer is
removed and then rotated
anti-clockwise
to prevent kinked hoses.
OR
SECURE WITHOUT DRAWER REMOVAL
7
ATTACH SIDE MOUNTING BRACKETS
Clip all four side mounting brackets into their
slots using a flat-bladed screwdriver. Ensure
they're securely fitted before sliding product
into cavity.
The mounting slots are in pairs, one on each side
diagonally across the product. A bracket must
match A slot and B bracket must match B slot.
8
MOVE INTO THE CAVITY
If top mounting brackets are being
2 used, ensure they're securely fitted
before sliding product into cavity.
optional
(x2)
When feet are extended,
take care when pushing
the product into the cavity
2
1
(FRAMELESS CABINETRY ONLY)
Ensure hoses and cord
are not kinked or
twisted.
3
3
1