Aaeon SBC-551 Manual page 63

Power Management
Power management lets you set up your computer to save electrici-
ty when it is not actively in use by putting the system into progres-
sively greater power saving modes. In the power management
scheme there are four system states which proceed in the following
sequence:
Normal Doze
There are four selections for Power Management (PM):
Disabled
Max Saving
Min Saving
User Defined
With the exception of Disabled, three of the above selections have
"fixed-mode" settings. Therefore, when PM is set to Disabled,
some items which are predefined will become unmodifiable.
PM Control by APM
When this is set to Yes, the Advanced Power Management feature
in Microsoft Windows controls power management operation. The
default setting is No.
Video Off Option
User can select 4 different modes for turning off the video. The
modes are a function of the PM mode of the computer. The choices
are All Modes Off, Always On, Suspend Off, and Susp, St-
by Off.
The table below summarizes the behavior of the monitor in relation
to the four PM modes.
Standby
Turns off PM
Maximized power saving by activating maxi-
mum power saving settings after one minute of
system inactivity.
Produces less power saving by activating
moderate power saving settings after one hour
of system inactivity.
You set the power saving options manually.
Chapter 3 Award BIOS Setup
Suspend
55