Technicolor TC7200.20 User Manual page 63


Rate: It decides the speed of data transmission. There are several rates provided here for you to choose.
Choose any one of it according to your needs by using the drop-down menu.

Beacon Interval: Set the period of beacon transmissions to allow mobile stations to locate and identify
a BSS. The measure unit is "time units" (TU) of 1024 microseconds. (Value range: 1~65535)

DTIM Interval: The value you set here is used to inform mobile stations when multicast frames that
have been buffered at the Wireless Voice Gateway will be delivered and how often that delivery occurs.
(Value range: 1~255)

Fragmentation Threshold: Set the number of the fragmenting frames to make the data to be delivered
without errors induced by the interference. Frames longer than the value you set here are fragmented
before the initial transmission into fragments no longer than the value of the threshold. (Value range:
256~ 2346)

RTS Threshold: Set the value for sending a request to the destination. All the frames of a length
greater than the threshold that you set here will be sent with the four-way frame exchange. And, a
length less than or equal to the value that you set will not be proceeded by RTS. (Value range: 0~ 2347)
Page 63 / 85