Attaching The Cable Tv Wire To The Wireless Voice Gateway - Technicolor TC7200.20 User Manual

Attaching the Cable TV Wire to the Wireless Voice Gateway

1. Locate the Cable TV wire. You may find it one of three ways:
a. Connected directly to a TV, a Cable TV converter box, or VCR. The line will be connected to the
jack, which should be labeled either IN, CABLE IN, CATV, CATV IN, etc.
b. Connected to a wall-mounted cable outlet.
c. Coming out from under a baseboard heater or other location. See Figure 1-6 for the wiring
example.
Notes: For optimum performance, be sure to connect your
Wireless Voice Gateway to the first point the cable enters your
home. The splitter must be rated for at least 1GHz.
Fig. 1-6 Basic Home Wiring
Page 16 / 85