Technicolor TC4400 Quick Installation Manual
Internet modem
Hide thumbs
Also See for TC4400:
- Quick start manual ,
- Quick installation manual (6 pages) ,
- Setup manual (2 pages)
Advertisement
Quick Links
QUICK
INSTALLATION
GUIDE
FOR YOUR CABLE MODEM
STEP BY STEP
INSTRUCTIONS
TO CONNECT
CABLE INTERNET MODEM (MODEL TC4400)
Purchased a Wi-Fi Router from Flash Services?
Follow the Modem & Wi-Fi Router Combo Quick
Installation Guide included with your router.
IMPORTANT!
Wait until your
internet installation/
INCLUDED
activation date and
EQUIPMENT:
time, then follow the
steps below:
STEP
Connect your Coaxial Cable to the Modem
•
Locate the coaxial cable in your home
(connected to the cable outlet).
•
Connect it to the cable port.
(located on the back of the modem), using
3 clockwise rotations or until securely fastened.
Cable Port
Coaxial cable
second end in the modem
Coaxial cable is not
included in the box
CABLE MODEM
Locate Coaxial cable
wall outlet connection
in your home
INTERNET MODEM
(TC4400)
ENGLISH
ETHERNET CABLE
STEP
Power on your Modem
•
Plug the modem power adapter into the back of the modem.
•
Connect the other end into the nearest power outlet.
•
If the modem is equipped with a power button, please press
the button to power on the device.
•
If the modem is not equipped with a power button, the modem
should be powered on.
•
The "Power" LED on the front of the modem should be green.
Power adapter is
included in the box
MODEM POWER ADAPTER
Advertisement
Related Manuals for Technicolor TC4400
Summary of Contents for Technicolor TC4400
- Page 1 INTERNET MODEM (TC4400) ENGLISH STEP BY STEP INSTRUCTIONS TO CONNECT CABLE INTERNET MODEM (MODEL TC4400) Purchased a Wi-Fi Router from Flash Services? Follow the Modem & Wi-Fi Router Combo Quick Installation Guide included with your router. CABLE MODEM ETHERNET CABLE...
- Page 2 STEP Confirm Modem is Online • Wait until the “Online” LED is solid green. • This may take up to 10 minutes. Note: You must have a Wi-Fi router if you want to set up a wireless network in your home. Note: If the DS and US LEDs are both blinking at the same time, your modem is updating its software.
Need help?
Do you have a question about the TC4400 and is the answer not in the manual?
Questions and answers
How do I make the router work on 2.4 GH frequency ? Manual to download ?
The Technicolor TC4400 is a cable modem, not a wireless router. It does not have built-in Wi-Fi capabilities, including 2.4 GHz or 5 GHz wireless frequencies. To use Wi-Fi, you need to connect a separate wireless router to the TC4400 using an Ethernet cable. Wi-Fi configuration, including 2.4 GHz settings, must be done on the connected router.
This answer is automatically generated