Connecting The Ac Power Cord - Sony PVM-X300 Operating Instructions Manual

t AUDIO OUT connector (stereo mini jack)
Outputs the audio of the signal which is selected using
the input select button on the front panel.
When the SDI signal is selected, the audio signals of the
channels selected with AUDIO SETTING in the USER
CONFIG menu are output.
Connecting the AC
Power Cord
1
Plug the AC power cord into the AC IN socket on
the rear. Then, attach the AC plug holder
(supplied) to the AC power cord.
AC IN socket
AC IN socket
AC power cord
2
Slide the AC plug holder over the cord until it
locks.
To disconnect the AC power cord
Pull out the AC plug holder while pressing the lock
levers.
LAN
PEER TO PEER
NETWORK
LAN AUDIO
5V 0.5A (10/100) OUT
AC plug holder
(supplied)

Connecting the AC Power Cord

11