Input Signals And Adjustable/Setting Items - Sony PVM-X300 Operating Instructions Manual

Note
The operations of the buttons and controls may differ
when the optional BKM-XP1 4K SxS Player is used. For
details, refer to the operation manual of the BKM-XP1.
f 1 (standby) switch and indicator
Press to turn the power on when this unit is in standby
mode. After being turned on, the unit performs
initialization and the indicator flashes in green. The
indicator lights in green once initialization is completed.
Press the switch again to set the monitor in standby
mode. The indicator goes out.
Note
The indicator temporarily lights in green even in standby
mode, immediately after the AC power cord is
connected to an AC outlet.
Error display by the indicator
The indicator of the 1 (standby) switch on the front
panel may show an error while the monitor is being
operated. If the error is shown, please contact an
authorized Sony dealer.
Error display Symptoms
Flashes in red Device error
Lights in amber The temperature in the panel part is
unusual.
Flashes in amber The ambient temperature sensor is
unusual.
Flashes in green and Fan error
amber
Flashes in green and Option's error
red
Input Signals and Adjustable/
Setting Items
The adjustable/setting items for the signals input via the
SDI IN connectors, HDMI connectors and the BKM-
XP1 installed on the OPTION mount are as follows:
Item
SDI
a
BRIGHTNESS
a
CONTRAST
a
CHROMA
a
BACKLIGHT
a
NATIVE SCAN
a
VOLUME
a
VIEW MODE
a
APERTURE
AUDIO LEVEL
a
METER
a
TIME CODE
a
MARKER
a
COLOR TEMP
a
COLOR SPACE
a
GAMMA
a
FOCUS ASSIST
a
CHROMA UP
×
a : Adjustable/can be set : Not adjustable/cannot be set
1) The setting is fixed to NATIVE SCAN for the HDMI SD and
computer signal input.
2) When a 4K or QFHD-resolution picture is displayed, the
actual display position of the time code, in certain cases,
differs from the position set in the TIME CODE SETTING
menu.
3) This item is not available for the HDMI SD and computer
signal input.
4) This item is not available for the HDMI computer signal input.
In this manual, the BKM-XP1 installed on the OPTION
mount is referred to as OPTION, and the input via the
BKM-XP1 is referred to as the OPTION input.
Location and Function of Parts and Controls
Input signal
HDMI OPTION
a a
a a
a a
a a
1)
a a
a a
× ×
a a
a
×
2) 2)
a
×
3)
a a
a a
a a
a a
4)
a a
a a
9