Hitachi G1000 User Manual page 98

Procedure
1 Change the attribute of the port (CL5-A) on the primary storage system
.
to External.
raidcom modify port -port CL5-A -port_attribute ELUN -IH0
2 Change the attribute of the port (CL5-C) on the secondary storage system
.
to External.
raidcom modify port -port CL5-C -port_attribute ELUN -IH1
Check command and output examples
1 Display port information for the primary system.
.
raidcom get port -IH0
PORT
WWN
(snip)
CL5-A
50060e80072b6740
(snip)
2 Display the port information for the secondary system. Confirm that the
.
port attributes have been changed as intended.
raidcom get port -IH1
PORT
4-18
Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide
TYPE ATTR SPD
PHY_PORT
FIBRE ELUN AUT
-
TYPE ATTR SPD
Configuration and pair management using CCI
LPID FAB CONN SSW
E4 N FCAL N
LPID FAB CONN SSW
SL Serial#
0 311111
SL Serial#