Creating A Pool - Hitachi G1000 User Manual

2 If necessary, set the host mode for the new host group (Windows host
.
mode shown).
raidcom modify host_grp -port CL1-C-1 -host_mode WIN -IH1
3 Reserve host group (CL1-C-1) to resource group 1. For instructions, see
.
Reserving a host group ID on page
Check command and output examples
Display the information about the host group that is set for port (CL1-C).
Confirm that the port name, host group ID, and host group name are correct.
raidcom get host_grp -port CL1-C -IH1
PORT
HMO_BITs
CL1-C
CL1-C
Related topics
• Reserving a host group ID on page 4-29

Creating a pool

After creating host groups, you need to create a pool volume, format the
volume, and create a Dynamic Provisioning pool.
4-36
Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide
GID GROUP_NAME
0 1C-G00
1 HAVol
Configuration and pair management using CCI
4-29.
Serial# HMD
322222 WIN
322222 WIN