Hitachi G1000 User Manual page 141

Only valid storage and virtual storage machine information is
displayed. If volume type is HDP, select the Volume location. If
volume type is HDT, the Volume Selection options are displayed.
You cannot allocate Basic volumes.
b Click Advanced Options for further configuration.
.
c In LUN Path Options:
.
Edit LUN paths from primary storage ports to hosts.
d Click Host Group and LUN settings for further configuration.
.
e In Pair Management Server Settings:
.
Select an available host as the pair management server. For Instance
ID, click Existing to use a current configuration definition file and
related instance ID number on the pair management server, or click
New to create a new configuration definition file, and enter a new
instance ID number which will be validated as an available instance
ID. You can also specify a UDP Port number for the instance.
4 On the Secondary tab, configure the following options:
.
a Select the secondary Storage system, Virtual Storage Machine,
.
and Volume type (HDP or HDT):
Virtual storage machine information defaults to the primary tab value.
b In Advanced Options:
.
Unlike the Primary tab, select HDP pools for the secondary storage
system (Pools for S-VOL) that correspond to the HDP pools configured
on the primary tab (Pools for P-VOL). For example, automatic
selection of HDP volumes will display primary HDP pools, and eligible
secondary HDP pools for volume allocation. You can examine primary
tab HDP pool and volume details with links. You can accept the HDP
pools selected for secondary volumes, or make a manual selection by
clicking Select Pool to list and select eligible HDP pools, and selecting
eligible volumes from the HDP pools.
c In LUN Path options:
.
Edit LUN paths from secondary storage ports to hosts. LUN Path
Setting Information on Primary Site lists the primary storage
system, and No. of LUN Paths per volume. Click the link to display
primary storage system mapping information.
d Click Host Group and LUN settings for further configuration.
.
e Click Pair Management Server Settings for further configuration.
.
5 Click Virtual ID Settings for further configuration.
.
These settings display only when options other than the default virtual
storage machine are used on the primary storage.
6 In Pair Settings:
.
Select the Quorum Disk, select new or existing in the Copy Group for
management purposes, and then manually enter a name (Prefix and Start
Sequence No.) or select Automatic for Pair Name and a name will be
created.
7 Click Show Plan and confirm that the information in the plan summary is
.
correct. If changes are required, click Back.
Using Hitachi Command Suite to set up global-active device
Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide
5-13