Updating The Cci Configuration Definition Files - Hitachi G1000 User Manual

Procedure
Specify host group (CL1-C-0) and LU (0) to add an LU path to S-VOL
(0x4444).
raidcom add lun -port CL1-C-0 -lun_id 0 -ldev_id 0x4444 -IH1
Check command and output examples
Display the information about the LU paths that are defined in host group
(CL1-C-0).
raidcom get lun -port CL1-C-0 -fx -IH1
PORT
CL1-C

Updating the CCI configuration definition files

Before creating the GAD pair, you must update the CCI configuration
definition files on the primary and secondary systems to add the information
for the volumes that will become the P-VOL and S-VOL.
• Shutting down CCI on page 4-42
• Editing CCI configuration definition files on page 4-42
Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide
GID HMD
0 WIN
Configuration and pair management using CCI
LUN NUM LDEV
0 1 4444
CM Serial# HMO_BITs
- 322222
4-41