Performing Speech Audiometry - otometrics madsen itera ii User Manual

11 Performing speech audiometry

1. If needed, select
2. Prepare the patient. If you wish to instruct the patient after you have placed the transducers on the head of the
patient, you can use the
TALK OVER
when
3. Select test conditions for ear, transducer, unmasked/masked, and test type on MADSEN Itera II.
4. Select the test frequency with the
5. Select the stimulus level with the
6. Present the tone with the stimulus presentation button
7. Use the
8. Repeat steps 4 to 8 until all the measurements you need have been completed. If needed, did you test:
– Both ears
– Air conduction
– Bone conduction
– Masking
– Threshold, MCL and UCL
9. Save the audiogram.
11 Performing speech audiometry
For detailed examples of audiometric testing, see the MADSEN Itera II Reference Manual.
12
TONE
on MADSEN Itera II.
TALK OVER
is active.
FREQUENCY
LEVEL
STORE
button to store the data point and proceed to the next frequency.
button. You can talk to the patient to adjust the patient communication levels
knob.
knobs.
INT.
.
A. Stimulus bar
B. Work area
C. Legend box
Otometrics - MADSEN Itera II