Table of Contents
Related Manuals for otometrics Bio-Logic NavPRO ONE
Summary of Contents for otometrics Bio-Logic NavPRO ONE
- Page 1 Bio-logic ® Bio-logic NavPRO ONE ® ABR screening Quick start guide Doc. No.7-26-1388-EN/00 Part No.7-26-13808-EN Natus Medical Denmark ApS. +45 45 75 55 55. otoinfo@natus.com Natus Medical Incorporated. 1-800-289-2150. otoorder.us@natus.com www.otometrics.com...
- Page 2 Start menu Note: this screen (test options) can vary depending on your set up Battery indicator Battery status Current time Select patient Customize Additional information about options for Turn off device current screen Otometrics - Next generation Bio-logic products...
- Page 3 Connect the electrode cable to the white and the probe to the red connector. Clean the patient’s skin and place the electrode pads. Connect the clips to the corresponding sites. White: high forehead Black: cheek Red: mastoid Otometrics - Next generation Bio-logic products...
- Page 4 An impedance check excessive ambient noise. will be performed prior to measurement. An impedance below 6 k ohm is recommended for best test results. Otometrics - Next generation Bio-logic products...
- Page 5 ABR sreening test results Swipe screen up and down to change display scale Overall screening test result Test parameters and conditions Test other ear Print results to a label or to a pdf file Otometrics - Next generation Bio-logic products...
- Page 6 PATH medical GmbH. Copyright © 2016 PATH medical GmbH PATH medical GmbH Landsberger Straße 65 82110 Germering Germany Tel: +49 89 800 76 502 Fax: +49 89 800 76 503 Internet: www.pathme.de Otometrics - Next generation Bio-logic products...
Need help?
Do you have a question about the Bio-Logic NavPRO ONE and is the answer not in the manual?
Questions and answers