Using The Slicing Machine; Loading The Goods; Cutting The Goods - Berkel 330M Instructions For Use, Installation And Maintenance

Flywheel slicing machine

Hide thumbs Also See for 330M:

Table of Contents

6. USING THE SLICING MACHINE

Using the flywheel (1) bring the carriage (2) all

forward (towards the operator);

Pull back the sliding overplate (3) completely (away

from the blade) using the handwheel (4);

Place the food to be sliced on the overplate and

block it with the food press (5) regulating the height

as well;

Regulate the thickness of the slice by pulling and

rotating the knob (6) at the same time, graduated

from 0 to 16;

Bring the overplate with the goods towards the blade

by using the rapid advance lever or the handwheel;

Turn the flywheel clockwise (do not turn it counter

clockwise, this could seriously damage the

machine);

During the forward movement of the carriage

(away from the operator) the goods will go into the

blade and the slice, guided by the slice deflector,

will fall onto the plate below;

During the return movement of the carriage

(towards the operator) the mechanical device

which makes the overplate advance transversally

towards the blade will be put into motion, its value

pre-determined with the slice thickness regulating

knob.

Installation, use and maintenance 330M

Table of Contents