Assembly instructions
Attention!
The assembly sequence is designed for the optimization of time and effort. The
assembly instructions must be followed section by section and step by step.
Elevator assembly installation
1. Using the cord inserted in the fuselage, guide the servo cable of the elevator
assembly into the fuselage. Tie the cord to the servo cable of the elevator
assembly, as pictured.
2. Pull the cable into the fuselage through the cable channel.
GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
No liability for printing errors. Technical changes reserved 28/3/2012 ID no. 0062914
Page 12