Advertisement
Quick Links
Order No. 9502
Assembly Instructions
DANDY
ARTF RC model aircraft
Wingspan approx. 1600 mm
This model requires a two-function HoTT COMPUTER SYSTEM
GRAUPNER/SJ GmbH D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors.
03/2013
1
Advertisement
Related Manuals for GRAUPNER DANDY ARTF RC
Summary of Contents for GRAUPNER DANDY ARTF RC
-
Page 1: Assembly Instructions
Order No. 9502 Assembly Instructions DANDY ARTF RC model aircraft Wingspan approx. 1600 mm This model requires a two-function HoTT COMPUTER SYSTEM GRAUPNER/SJ GmbH D-73230 KIRCHHEIM/TECK GERMANY Modifications reserved. No liability for printing errors. 03/2013... - Page 2 Introduction The DANDY is a classic Graupner/SJ model aircraft which offers an outstanding per- formance in the air. The DANDY was first introduced way back in 1968, and its design remains timelessly elegant. The model can be launched by hand-tow or bungee, but can also be flown as a powered glider with a motor pylon.
- Page 3 The servos can now be fitted in the fuselage. Each is secured using four self-tapping screws, which are also included in the servo accessory packs. GRAUPNER/SJ GmbH D-73230 KIRCHHEIM/TECK GERMANY Modifications reserved. No liability for printing errors. 03/2013...
- Page 4 2 mm Ø holes at the marked points. Fix the horns to the rudder and elevator using a spreader plate and two pan-head screws each. GRAUPNER/SJ GmbH D-73230 KIRCHHEIM/TECK GERMANY Modifications reserved. No liability for printing errors.
- Page 5 Drill a central 1 mm Ø hole in the underside of the fuselage for the towhook. Screw the hook into the hole, and secure it with a drop of cyano. GRAUPNER/SJ GmbH D-73230 KIRCHHEIM/TECK GERMANY Modifications reserved. No liability for printing errors.
- Page 6 LiPo battery. If the BEC plug and socket are left connected, a small GRAUPNER/SJ GmbH D-73230 KIRCHHEIM/TECK GERMANY Modifications reserved. No liability for printing errors.
- Page 7 30%: move the toggle switch back to reduce travels. For the first few flights we recommend activating the Dual Rate function, i.e. you should fly the model with reduced travels. GRAUPNER/SJ GmbH D-73230 KIRCHHEIM/TECK GERMANY Modifications reserved. No liability for printing errors. 03/2013...
- Page 8 Fine-tuning is carried out using the trim sliders below and adjacent to the transmitter sticks. Always land the model directly into wind. All of us at Graupner/SJ Modellbau hope you enjoy many fine flights with your new DANDY The picture shows the DANDY fitted with the motor pylon No. 2917 during a fast low pass.
- Page 9 All model flyers should behave in a way which minimises the danger to people and property. Never act in any manner which will disturb other pilots, or have an adverse effect on safe, orderly flying at the site. GRAUPNER/SJ GmbH D-73230 KIRCHHEIM/TECK GERMANY Modifications reserved. No liability for printing errors.
- Page 10 If material defects or manufacturing faults should arise in a product distributed by us in the Federal Republic of Germany and purchased by a consumer (§ 13 BGB), we, Graupner/SJ GmbH, D-73230 Kirchheim/Teck, Germany, acknowledge the obligation to correct those defects within the limitations described below.
Need help?
Do you have a question about the DANDY ARTF RC and is the answer not in the manual?
Questions and answers