Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Order No. 9546
Assembly Instructions
AMIGO IV
ARTF RC model aircraft
Wingspan approx. 2000 mm
This model requires a two-function HoTT COMPUTER SYSTEM
GRAUPNER/SJ GmbH D-73230 KIRCHHEIM/TECK
GERMANY
Modifications reserved. No liability for printing errors.
05/2013
1
Advertisement
Related Manuals for GRAUPNER AMIGO IV
Summary of Contents for GRAUPNER AMIGO IV
-
Page 1: Assembly Instructions
Order No. 9546 Assembly Instructions AMIGO IV ARTF RC model aircraft Wingspan approx. 2000 mm This model requires a two-function HoTT COMPUTER SYSTEM GRAUPNER/SJ GmbH D-73230 KIRCHHEIM/TECK GERMANY Modifications reserved. No liability for printing errors. 05/2013... -
Page 2: Computer System
Introduction The AMIGO IV is a classic Graupner/SJ model aircraft which offers an exceptional performance in the air. The timelessly elegant AMIGO first appeared on the market in the year 1960. In glider form the model can be launched by hand-tow or bungee, but it can also be flown as a powered glider with a motor pylon. - Page 3 Mark the position of the horn holes on the rudder and elevator, and drill 1.9 mm Ø holes at the marked points. Fix the GRAUPNER/SJ GmbH D-73230 KIRCHHEIM/TECK GERMANY Modifications reserved. No liability for printing errors.
- Page 4 2: rudder servo; socket 3: elevator servo. Refer to the graphic label on the receiver to ensure that the connectors are the right way GRAUPNER/SJ GmbH D-73230 KIRCHHEIM/TECK GERMANY Modifications reserved. No liability for printing errors.
- Page 5 The AMIGO IV with motor pylon The AMIGO IV can also be fitted with the motor pylon, Order No. 2910, if you wish to fly the model from a flat field site without using a bungee system (the motor pylon is not included in the pack).
- Page 6 Fit the motor pylon on the steel joiner between the two wing panels, push the wings firmly together, and fix the assembly to the fuselage using four rubber bands. The illustration shows the electric-powered version of the AMIGO IV with the motor pylon fitted.
- Page 7 Note: the C.G. of the AMIGO IV is further aft than normal due to the tailplane’s lifting airfoil. Control surface travels The control surface travels should be as follows, in each case measured at the trailing edge: elevator approx.
- Page 8 Take-off and landing strips should be kept free of people and other obstacles. Your RC system can only work reliably if the batteries are kept fully charged. GRAUPNER/SJ GmbH D-73230 KIRCHHEIM/TECK GERMANY Modifications reserved. No liability for printing errors.
- Page 9 If material defects or manufacturing faults should arise in a product distributed by us in the Federal Republic of Germany and purchased by a consumer (§ 13 BGB), we, Graupner/SJ GmbH, D-73230 Kirchheim/Teck, Germany, acknowledge the obligation to correct those defects within the limitations described below.
Need help?
Do you have a question about the AMIGO IV and is the answer not in the manual?
Questions and answers