Sales Demo Mode - GE WPGT9350 Technical Service Manual

Consumer Help Screens
Setting the
The machine settings on the Help feature
Machine allow you to control the volume of the button
beep and end-of-cycle signal, and turn the
Preferences
washer/dryer communication feature on or off.
Button Beep
The button beep controls the volume of the
beep that is made when you press any of the
buttons or the Touch Screen.
To change the volume of the button beep:
1 From the Home Screen, press the HELP
button.
2 Select MACHINE PREFERENCES from the
Touch Screen.
3 Select BUTTON BEEP from the Touch
Screen.
4 Use the arrows to make the volume louder
or softer, or to turn the beep off.
5 Select OK from the Touch Screen.
The new volume is now saved as the default
setting.
Washer/Dryer Communication
Washer/Dryer communication allows your
washer to send cycle information to your dryer
to create a dry cycle that matches your wash
load.
After the wash cycle is complete,
communication begins once either the washer
or dryer Touch Screen is activated.
Once the information is sent, your dryer will
create the optimal dry cycle for your load.
To turn the Washer/Dryer Communication
feature on or off:
1 From the Home Screen, press the HELP
button.
2 Select MACHINE PREFERENCES from the
Touch Screen.
3 Select WASHER/DRYER
COMMUNICATION from the Touch
Screen.
4 Touch the pad at the bottom of the Touch
Screen to select ON or OFF.
5 Select OK from the Touch Screen.

Sales Demo Mode

Pressing HOME and MY CYCLES simultaneously
for three seconds will enter into the sales
demonstration mode. This mode allows the user
to view a wash cycle. To exit the Demo Mode
press HOME and MY CYCLES simultaneously
for three seconds or disconnect the power to the
machine.
MACHINE PREFERENCES
END OF CYCLE
SIGNAL
End-of-Cycle Signal
The End-of-Cycle signal alerts you when the
cycle is complete.
To change the volume of the end-of-cycle
signal:
1 From the Home Screen, press the HELP
button.
2 Select MACHINE PREFERENCES from the
Touch Screen.
3 Select END OF CYCLE SIGNAL from the
Touch Screen.
4 Use the arrows to make the volume louder
or softer, or to turn the signal off.
5 Select OK from the Touch Screen.
The new volume is now saved as the default
setting.
The Washer Talks, The Dryer Listens
The Result is Better Clothes Care
START
DEMO
– 16 –
BUTTON BEEP
WASHER/DRYER
COMMUNICATION
Harmony Clothes
Care System
TRYTHE
LEARN
MORE CONTROLS