Quick Start - GE WPGT9350 Technical Service Manual

Quick Start

Getting
Loosely load clothes no higher than the top
row of holes in the washer tub. Overloading
Started
may reduce washer efficiency and possibly
increase wrinkling.
If the Touch
Add a low-sudsing, high-efficiency detergent.
Screen is
Add diluted fabric softener, bleach or wash
dark, press
boost additives as desired.
POWER or
the Touch
Screen to
access the
wash cycles
menu.
Select one of the five wash methods from the
Home Screen:
• Press BY COLOR to wash according to fabric
color.
• Press BY GARMENT to wash according to
clothing type.
• Press BY FABRIC to wash according to fabric
type.
• Press SPECIAL CYCLES to wash non-garment
items, or to select a rinse and spin or spin-
only cycle.
• Press STAIN INSPECTOR to wash items with
specific types of stains.
After selecting a wash method, use the Touch
Screen to select a specific wash cycle to match
your load.
Change any of the automatic settings, if
desired, by pressing the Touch Screen
and following the on-screen instructions.
By changing the settings you can:
• Remove heavier soil.
• Change the water temperature.
• Change the wash action to Vigorous, Normal,
Delicate or Hand Wash.
• Set a Delay Start, Extended Spin, Presoak or
Extra Rinse, or change the End-of-Cycle
Signal volume.
• Adjust time settings.
Close the lid and press START.
The washer will not fill unless the lid is closed.
After you press START, a Cycle Status screen
will appear to indicate what stage of the cycle
the washer is in and the time remaining in
the cycle.
TOUCH TO SELECT WASH CYCLE
BY
BY
FABRIC
SUMMARY SCREEN
COTTONS
CYCLE
WASH ACTION
NORMAL
– 8 –
COLOR GARMENT
BY
SPECIAL STAIN
CYCLES INSPECTOR
Home Screen
SOIL TEMP
OPTIONS TIME
0:54
S
TART
S
TOP