Backsplash - GE WPGT9350 Technical Service Manual

Backsplash

The backsplash must be removed to access the
control system components.
To remove the backsplash:
1. Remove the 2 Phillips head screws that hold
the backsplash in place.
2. Place a towel over the lid of the washer to
prevent scratches to the surface. Gently lift
each corner of the backsplash, then roll it
forward so it rests on top of the washer.
3. Disconnect the wiring to the keypanel.
Remove the backsplash.
Washer Components
– 23 –