GE WPGT9350 Technical Service Manual page 34

To remove the rotor and stator:
WARNING: The rotor is not grounded. Unplug
the washer before servicing to avoid electrical
shock
1. To access the motor, the washer must be
placed on its side. Place a towel or blanket
on the floor to prevent scratches to the
surface of the washer.
2. Remove the 24-mm (
rotor nut with a socket or open end Crescent
wrench (rotate rotor nut counterclockwise to
remove).
Note: Use a rubber mallet if needed to tap the
wrench to break the nut free.
Rotor Nut
– 34 –
/ in. SAE equivalent)
15
16