Demo Mode
To enter DEMO Mode:
1. Unplug the washer.
1
U
l
2. Open the door.
3. Wait 30 seconds.
4. Restore power to washer.
4
Restore power to washer
5. Press Start / Pause 4 times with 30 seconds of applying power.
In demo mode the only components that will function are the control
In demo mode, the only components that will function are the control
LEDs. No other components will operate. The count down display will
run much faster than normal.
To exit DEMO mode:
Same procedure as entering demo mode.
NOTE: Removing power from machine will not exit demo mode.
th
h
Copyright 2009
8