Demo Mode - GE PFWS4600L0 Technical Service Manual

Demo Mode

In demo mode, the only components that will function are the control LEDs. No other components will
operate. The countdown display will run much faster than normal.
To Enter Demo Mode
1. Turn off the unit.
1. Unplug the washer.
2. Open the door.
3. Wait 30 seconds.
4. Restore power to washer.
5. Press START/PAUSE 4 times within 30 seconds
of applying power.
To Exit Demo Mode
Use same procedure as entering demo mode.
Note: Removing power from washer will not exit
demo mode.
– 20 –