Microcom 438TC Operator's Manual page 222

^AB ^D COMMAND
26 Software Bank Switch #6: A non-volatile command used to set the various
functions identified below.
^AB12345678
Position:
1
2
3
4
5
6
7
8
27 Software Bank Switch #7: A non-volatile command used to set the various
functions identified below.
^AB12345678
Position:
123
456
7
8
438TC Operator's Manual - 880050-0100
1 = Enable >TRAY FULL< response; 0 = Enable Test Pattern
1 = Enable STL Emulation; 0 = Disable
1 = Enable Pre-Stock Out Feature; 0 = Disable
1 = Enable >STOCK NOT LOADED< response; 0 = Disable
1 = Enable 48-466 Compatibility mode; 0 = Disable
1 = General Purpose I/O Enable; 0 = Custom I/O Enable
1 = Enable Takeup Control; 0 = Enable Cutter Control
1 = Enable Nonstick TOF Mode; 0 = Disable
Select STL Stock Class:
100 Standard Ticket
010 Cinema Ticket
001 Wristbands
Select STL Stock Width (Inches):
000 1.00
100 1.328
010 2.00
110 2.125
001 2.50
101 2.75
011 3.25
111 4.00
1 = Disable System Parameter Saving; 0 = Enable
1 = Enable Finish Mode; 0 = Disable
13-9