Wire Feeder Options; Plasma Cutting - Lincoln Electric VANTAGE 600 SD Operator's Manual

®
VANTAGE 600 SD

WIRE FEEDER OPTIONS

™
LN-25 IRONWORKER WIRE FEEDER
Portable CV unit for flux-cored and mig welding with maxtrac
system. includes digital meters for wire feed speed/amperage
and voltage, gas solenoid, internal contactor and 5/64 in. (2.0 mm) drive
roll kit for cored wire. has 83% reduced wire feed speed capability for 6
o'clock pipe welding with Innershield
K2614-9
™ ®
K126 PRO Innershield Gun
For self-shielded wire with 15 ft. (4.5 m) cable. For .062-5/64 in.
(1.6-2.0 mm) wire. Includes K466-10 Connector Kit.
K126-12
KP1696-1 Drive Roll Kit - Includes: 2 V groove drive rolls and
inner wire guide for Steel Wires. (Used on LN-25 Pro)
Drive Roll and Guide Tube Kit
For .068-.072 in. (1.7-1.8 mm) cored or solid steel wire.
KP1697-068
®
Magnum PRO 350 Ready-Pak
®
Magnum PRO MIG/flux-cored welding guns are rated 100% duty
cycle. The guns are designed for high amperage, high duty cycle
applications in extreme environments where heat-resistance and
fast serviceability are key.
K2652-2-10-45
K487-25 Magnum SG Spool Gun
Hand held semiautomatic wire feeder. Requires SG Control
Module and Input Cable.
K488 SG Control Module
The Interface between the power source and the spool gun.
Provides control of the wire speed and gas flow. For use with a
spool gun.
K691-10 Input Cable (For SG Control Module)
For Lincoln engine power sources with 14-pin MS-type connec-
tion, separate 115V NEMA receptacles and output stud connec-
tions.
POWER FEED 25M
This compact shop or construction wire feeder is push-pull capa-
ble for premium aluminum welding. Featuring our MAXTRAC
drive system, full controls and procedural memory presets, the
®
Power Feed 25M is ready for advanced process welding on
almost any application.

PLASMA CUTTING

®
Tomahawk 1000
Cuts metal using the AC generator power from the engine-driven
welder. Requires the T12153-9 Full-KVA Power Plug (1-Phase).
K2808-1
®
wire drive
®
wire.
®
15 ft., .035-5/64 in.
®
C-2
ACCESSORIES