Konica Minolta bizhub 162 Installation Manual page 7

4508U007AA
4398U015AA
P202
P201
4398U016AA
4048U006AB
14. Connect the hookup harness connector,
which has been disconnected, to the
connector (P303) of the Image Controller
Board.
15. Install the Speaker & Battery Assy.
(two screws)
16. Connect the speaker and battery connectors
to the Fax Board.
• Plug the battery connector into the upper
connector (P202).
• Plug the speaker connector into the lower
connector (P201).
17. Place the harness in the edge cover.
18. Reinstall the Rear Cover. (nine screws)
NOTE
Use the screw with washer to the position
indicated by the arrow.
FK-505
I Installing the Fax Panel
4398U018AB
4398U019AA
4398U020AB
I Affixing the Panel Sheet (
4398U021AA
– 6 –
1. Remove the panel cover. (one screw)
2. Connect the hookup connector of the Fax
Panel to the connector of the control panel.
3. Secure the Fax Panel in position.
(one screw furnished with the kit)
NOTE
Fit the protrusion on the panel to the hook
on the machine.
)
particular area only
Affix the Panel Sheet to the Fax Panel.