Hardware Diagnostics - Lenovo ThinkStation P700 Hardware Maintenance Manual

Table 1. Items on the main screen of the UEFI diagnostic program
DIAGNOSTICS
• LCD test
• Memory - Quick test
• Memory - Extended test
• Motherboard test
• PCI-e test
• Storage - Quick test

Hardware diagnostics

Your computer supports the hardware diagnostics function. This function enables your computer to
monitor some hardware components in real time for potential issues that might not be easily detectable
during normal use. When the computer detects an issue or error, the diagnostic indicator on the front of
the computer is illuminated or blinks. See "Locating connectors, controls, and indicators on the front of
your computer" on page 28.
For information about the issue or error, do the following:
1. Connect either of the following devices to the diagnostic USB connector on the front of the computer:
• A USB key
TM
• An Android device with the Lenovo Workstation Diagnostics app installed
See "Locating connectors, controls, and indicators on the front of your computer" on page 28.
2. Wait about 10 to 15 seconds for the diagnostic data to transfer from the computer to the USB device.
During the data transfer, the diagnostic indicator blinks quickly. When the data transfer finishes, the
indicator stops blinking and stays on.
Note: Diagnostic data is available for transfer through the diagnostic USB connector only when the
diagnostic indicator is illuminated or blinks at an error detection. In normal conditions, the diagnostic
USB connector functions as a standard USB 3.0 connector.
3. Depending on whether you are using a USB key or an Android device (such as a smartphone), do
one of the following:
• If you are using a USB key, go to http://support.lenovo.com/workstation_diagnostics for information
about how to read the error data on the USB key.
• If you are using an Android device with the Lenovo Workstation Diagnostics app installed, open the
application for details about the error. For more information on the Lenovo Workstation Diagnostics
app, go to http://www.thinkworkstationsoftware.com/diags
For more information about how to use the diagnostic USB connector on your computer,
decipher the error codes, or use the Lenovo Workstation Diagnostics app, go to
http://www.thinkworkstationsoftware.com/diags.
The hardware diagnostic function is enabled on your computer by default. To disable the function, do
the following:
1. Start the Setup Utility program. See "Starting the Setup Utility program" on page 65.
2. From the Setup Utility program main menu, select Advanced ➙ Diagnostic function, and then press
Enter.
3. Select Real-time Diagnostic Monitoring and press Enter. Then select Disabled and press Enter.
4. Press F10 to save changes and exit the Setup Utility program.
TOOLS
• System information
• Recover bad sectors tool
• Generate configuration file
• Execute from configuration file
• Exit application
.
Chapter 8 Troubleshooting and diagnostics
93