Figure 109. Positioning the rear fan assembly
8. Pivot the new rear fan assembly toward the rear panel as shown until the retaining clip snaps into
position.
Figure 110. Installing the rear fan assembly
9. Connect the rear fan assembly cable to the rear fan connector on the system board. See "Locating
parts on the system board" on page 35.
10. Reinstall the heat sink and fan assembly if you have removed it. See "Replacing the heat sink and
fan assembly" on page 172.
11. Reinstall the direct cooling air baffle. See "Removing and reinstalling the direct cooling air baffle" on
page 112.
.
Chapter 11
Installing or replacing hardware
171