White Balance - Panasonic VDR VDR-D220 Operating Instructions Manual

Recording

White balance

This is for recording in natural colors.
(RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD)
The automatic white balance function may not
reproduce natural colors depending on the
scenes or lighting conditions. If so, you can
adjust the white balance manually.
¬ Rotate the mode dial to select
.
1
Set the AUTO/MANUAL/FOCUS
switch to MANUAL.
MNL
The icon shown in the illustration is displayed
automatically.
2
Move the joystick up to select
[ ].
MNL
3
Move the joystick left or right to
select the white balance mode.
MNL
56
LSQT1146
or
3/3 NEXT 3/3 3/3 NEXT NEXT
3/3 NEXT 3/3 3/3 NEXT NEXT
BACK BACK BACK
[ ] Auto white balance adjustment
AWB
[ ] Indoor mode (for recording under
incandescent lamps)
≥ Incandescent lights, halogen lamps
[ ] Outdoor mode
≥ Outdoors under a clear sky
[ ] Manual adjustment mode
≥ Mercury-vapor lamps, sodium lamps,
some fluorescent lights
≥ Lights used for wedding receptions at
hotels, stage spotlights in theaters
≥ Sunrise, sunset, etc.
To restore to the automatic adjustment
Set the white balance mode to [
≥ You can also restore the automatic adjustment
by setting the AUTO/MANUAL/FOCUS switch
to AUTO.
To set the white balance manually
1
Select [ ], and fill the screen
with a white subject.
MNL
2
Move the joystick up to select
[ ].
MNL
When the [ ] display changes from flashing to
on, setting is complete.
≥ When the [ ] display continues flashing, the
white balance cannot be set because the place
is dark etc. In this case, use the automatic
white balance.
].
AWB
BACK BACK BACK
BACK
BACK BACK BACK